In stock — Lehigh Valley

Used Pallet Racking for sale in the Lehigh Valley

Inspected, graded used pallet racking and used warehouse racking, delivered and installed across the Lehigh Valley at 40–60% below new.

Get a Free Estimate (610) 854-8149
Used pallet racking available for sale in the Lehigh Valley
OSHA-COMPLIANT — Used Pallet Racking

Used Pallet Racking for warehouses across the Lehigh Valley. Free, no-obligation estimates.

(610) 854-8149 Free Estimate

Overview

Used Pallet Racking in the Lehigh Valley

Lehigh Valley Pallet Racking stocks and sells inspected used pallet racking throughout Lehigh and Northampton counties. Used warehouse racking and used industrial pallet racking are the same product under different names, so whichever term you searched, this is the page. Every component we resell is inspected against ANSI/RMI MH16.1 and graded before it leaves our hands, which is what separates genuine used rack from ungraded teardown steel. If you are equipping a warehouse on a budget, used inventory typically saves 40–60% versus new while meeting the same safety standard — and it ships in weeks rather than the 8–12 weeks new uprights commonly run on allocation.

Graded used pallet racking holding palletized inventory in a Lehigh Valley warehouse
Used pallet racking rows reinstalled in a Lehigh Valley facility

In stock now

Used Warehouse Racking We Stock

Inventory turns fast, so treat this as the typical range rather than a live list — call with your beam lengths and upright heights and we will confirm what is on the floor today.

  • Used selective uprights and beams in all common sizes, 8 ft through 24 ft
  • Used drive-in rack components for high-density and cold-storage applications
  • Used cantilever arms and columns for pipe, lumber, and long goods
  • Used push-back cart systems and pallet flow lane components
  • Used wire mesh decking, row spacers, and column protectors
  • Mix-and-match components to fill gaps in an existing system

Inspection & grading

Used Industrial Pallet Racking — Inspected & Graded

Every used rack component is inspected to ANSI/RMI MH16.1 before resale, with photographic documentation and severity grading on each piece. In the Lehigh Valley we additionally assess for surface corrosion and base-plate degradation, because a meaningful share of regional inventory comes out of dock-adjacent and unheated buildings along the I-78 corridor. We disclose cosmetic versus structural issues upfront, and we do not resell anything that fails structural criteria — it goes to scrap instead.

The savings

Used vs. New: What You Actually Save

Typical savings run 40–60% off new equivalent pricing. On a mid-sized Lehigh Valley buildout of 500–1,000 pallet positions that is often $30,000–$100,000 in material cost alone, before the schedule savings. Most insurance carriers accept properly inspected used rack as equivalent to new, and used systems can be permitted and engineered exactly like new ones when the application calls for it.

When it fits

When Used Pallet Racking Is the Right Call

Used is not automatically the answer. It wins clearly in these situations:

  • A new-rack quote came in 40–60% over budget and the application does not require new
  • Standing up temporary or overflow storage for a seasonal surge
  • A start-up or fast-growing operation that needs rack in weeks, not months of lead time
  • Short-lease 3PL and e-commerce buildouts where flexibility outranks a 20-year lifecycle
  • Replacement components matching a discontinued manufacturer line
  • Contractor, agricultural, and trade storage where full new-rack spec is overkill
Graded used pallet racking holding palletized inventory in a Lehigh Valley warehouse

Straight comparison

Used Rack Grades — What the Tiers Actually Mean

"Used" covers a wide range of steel, and the differences matter for safety and permitting. Here is the honest breakdown of what you are buying at each tier.

  • Used Inspected Selective

    Best forMost Lehigh Valley warehouses needing cost-effective pallet storage

    ANSI/RMI graded, corrosion-assessed, ready to ship — 40–60% below new

  • Used Drive-In / Cantilever

    Best forAgriculture, contractor yards, and long-goods storage with flexible specs

    Available but inspect carefully — corrosion risk in dock-adjacent histories

  • Reconditioned / Repainted

    Best forCustomer-facing or showroom-adjacent storage areas

    Same structural grade as inspected used, refinished — modest premium

  • Surplus / Teardown (Ungraded)

    Best forNon-structural or low-load shelving only

    Lowest cost but carries no safety grade — we do not recommend it for pallet loads

Have rack to sell instead?

If you are downsizing, relocating, or closing a Lehigh Valley facility, we buy complete racking systems and individual components — on-site assessment, firm written offer, and our crew handles all disassembly and removal.

We Buy Used Pallet Racking

Straight answers

Used Pallet Racking questions

1

Is used pallet racking safe to buy?

Yes — when properly inspected. All rack in our Lehigh Valley inventory is inspected against ANSI/RMI MH16.1 before resale, with photographic documentation and severity grading on each component. In the Lehigh Valley environment we also assess for surface corrosion and base-plate degradation from dock moisture exposure. We disclose cosmetic vs structural issues upfront and do not resell anything that fails structural criteria.

2

How much will I save buying used rack vs new in the Lehigh Valley?

Typical savings are 40–60% off new equivalent pricing. For a mid-sized Lehigh Valley warehouse buildout of 500–1,000 pallet positions, that is often $30,000–$100,000 saved on material cost alone. Lead time is also faster — used rack is often available this week, while new uprights can run 8–12 weeks on allocation.

3

What types of used rack do you typically stock?

Lehigh Valley inventory varies but typically includes selective uprights and beams in all common sizes (8 ft to 24 ft), drive-in components, cantilever arms and columns, push-back cart systems, wire mesh decking, and pallet flow lane components. In our market we verify that used rack from high-piled storage or dock-exposed buildings is free of structural corrosion before resale. Inventory turns fast — contact us with your spec and we will confirm current stock.

4

Where can I buy used pallet racking in the Lehigh Valley?

Lehigh Valley Pallet Racking stocks and sells inspected used pallet racking region-wide, delivered and installed from Allentown to Hellertown. Used systems typically cost 40–60% less than new, every component is inspected to ANSI/RMI standards before resale, and constant tenant turnover across the Valley keeps quality inventory circulating. Call (610) 854-8149 with your beam lengths and heights for current stock.

5

Can used pallet racking be permitted and engineered like new?

Yes. Used rack can carry stamped drawings and pass plan review the same as new, provided the components are identified, graded, and rated. We handle the engineering and permitting in-house, so if your Lehigh Valley municipality requires sealed drawings for high-piled storage, buying used does not change the path — it only changes the material cost.

6

Do you deliver and install used racking, or is it pickup only?

Both. You can pick up from our inventory, or we can deliver and professionally install the system — the same crews that handle new-rack installations. For most Lehigh Valley buyers, having us install is what makes the used route practical, because it keeps responsibility for correct assembly and anchoring in one place.

Where we work

Used Pallet Racking across the Lehigh Valley

We deliver used pallet racking to warehouses in both Lehigh Valley counties — Lehigh and Northampton — plus the neighboring Pennsylvania, Maryland, and New Jersey line. Pick your area for local permitting details, typical ceiling heights, and the industries we work with there.

View All Service Areas

Ready when you are

Need used pallet racking
in the Lehigh Valley?

Get a Free Estimate (610) 854-8149